3DXSTAT™ ESD-Safe ABS 3D FILAMENT

Target surface resistance: 10^7 to 10^9 Ohm. Compare to Stratasys® ABS-ESD7 in performance and price and you'll never go back! Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.alternative to Zortrax Z-ESD.

Benefits of 3DXSTAT™ ESD-PETG include:

• Consistent and reliable surface resistance
• Improved retention of impact & elongation vs. similiar ESD-safe materials
• Low particulate contamination
• Minimal contribution to outgassing and ionic contamination

 

Chemical Resistance:  

Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic. 

 

Target conductivity for 3DXSTAT™ ESD ABS: 

• 10^7 to 10^9 Ohm surface resistivity on 3DP sample using concentric ring method.
• Note:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer / application.

Recommended Print Conditions:

• Extruder:  Ideally 220 to 240°C
• Platform Temp:  100 to 110°C
• Platform Prep:  Clean glass w/ Kapton Tape, ABS/Acetone slurry

(3DX-ESDABS-1KG-1.75)