BCN3D Sigma Independent Dual Extruder 3D Printer R16.5
Now comes with the smart fan upgrade kit and new stepper driver kit. Bringing the machine virtually up to the same standard as the new R17. But at a massive saving.
We only have a few of these machines left.
- Smart fan upgrade
- Stepper driver kit
- 3 x Buildtak sheets
- 10 x Taulman3D Nvent 0.5kg assorted colours
The Sigma from BCN3D is the first and only commercially available independent dual extrusion 3D printer.
The IDEX system allows you to achieve the most accurate dual extrusion prints possible. The Sigma is also capable of printing high quality parts down to layer heights as low as 50 micron.
It also offers a generous build volume of 297x210x210 mm.
|Structural technology||Independent Dual Extruder (IDEX)|
|Manufacturing technology||Fused Filament Fabrication (FFF)|
|Print volume||210mm x 297mm x 210mm|
|Nozzle diameter||0,4mm (Standard) / 0,6mm|
|TouchPAD Resistive Full Color|
|Electronics||BCN3D Electronics v1.0 & Independent Stepper Drivers|
|Firmware||BCN3D Sigma – Marlin|
|Certifications||CE / FCC|
|Connectivity||SD Card (autonomous operation) & USB|
|Layer height||50 microns to 300 microns (IDEX) (Standard nozzle of 0.40mm)|
|Positioning resolution (X/Y)||0,0125mm (FFF)|
|Positioning resolution (Z)||0,001mm|
|Maximum extruder temperature||290°C|
|Maximum printing temperature||280°C|
|Maximum hot bed temperature||100°C|
|Support Structures||PVA for PLA // HIPS for ABS|