TPU

Thermal Polyurathane (TPU) is a soft flexible rubber like filament. It has great moisture resistance and high layer bonding strength and is suitable for your flexible projects. 

As with most softer filaments print speed will need to be reduced. A good starting point is around 40mm/s, but this could vary depending on the machine. You will also need a feeder system that doesn't allow the filament to buckle and get caught around the extruder gear.

 

 

(FFS-TPU-BLACK)

SKU FFS-TPU-BLACK
Brand Filaform
Shipping Weight 0.8200kg
Shipping Width 0.210m
Shipping Height 0.050m
Shipping Length 0.210m
Shipping Cubic 0.002205m3

Great roll well packed. Slow

By: on 5 May 2017
Great roll well packed. Slow your speed and increase you flowrate
(5)

Great service, shipping was fast.

By: on 25 September 2016
Great service, shipping was fast. TPU is easy to print with, even with my setup that's not the best at printing flexible filament. Just slowed the print speed down a little and prints fine. Would buy again.
(5)

Great product and works with

By: on 27 August 2016
Great product and works with 3D Doodler
(5)

Prints fantastic!

By: on 21 August 2016
Prints fantastic!
(5)

This stuff's pretty good. It's

By: on 31 October 2015
This stuff's pretty good. It's just rigid enough to be used in my Lulzbot Mini, but soft enough to have good rubbery characteristics. So far I've made custom wrist bands and buttons for an electronics project.
(4)

Write a product review

We Also Recommend