Filaform Select PLA

PLA (Poly-Lactic Acid in full) is a bio-degradable plastic derived from plant based sources such as corn starch. Possibly the most popular desktop 3D printing material due to it's ease of use. It doesn't require a heated bed, has almost no warping and gives off a sweet smell when printing.


Contaminant Free

Produced in a temperature and humidity controlled environement, contamination from airborne particulates or moisture cannot reach the material during production. The extrusion machinery is cleaned after every run to guarantee each spool is free from imperfections.


Intelligently Wound Spooling

Each spool is perfectly wound by sofisticated electronics, placing each layer of filament side by side and with even tension. This results in a tangle free unwinding, eliminating failed prints caused by crossed over filament.


Remaining Filament Estimator

The clear spools have markings on the sides, indicating the length of filament remainging. This allows you to quickly judge if you have sufficient material to complete a job. 


Large Centre Hub

The uniquely designed spool has a large centre hub that reduces the radial stress on the filament. This greatly reduces the tendancy to "pig tail" when you get close to the end of the roll. This can be especially apparent with 2.85mm PLA. 





Brand Filaform
Shipping Weight 1.3500kg
Shipping Width 0.210m
Shipping Height 0.070m
Shipping Length 0.210m
Shipping Cubic 0.003087m3

Very happy with the prompt

By: on 16 March 2017
Very happy with the prompt delivery.

Top notch. Prints well, sticks

By: on 11 February 2017
Top notch. Prints well, sticks well to glass with glue stick, does not warp, and interlayer bonding is great.

IN use and going hard

By: on 25 June 2016
IN use and going hard

Unequal melting temp. Does not

By: on 12 December 2015
Unequal melting temp. Does not print well.

This filament prints well, I've

By: on 28 June 2015
This filament prints well, I've had no issues with raft adhesion etc.

Write a product review