Filaform Select PLA

Please note this is a mismade light grey, almost exactly the same as light grey!

PLA (Poly-Lactic Acid in full) is a bio-degradable plastic derived from plant based sources such as corn starch. Possibly the most popular desktop 3D printing material due to it's ease of use. It doesn't require a heated bed, has almost no warping and gives off a sweet smell when printing.

 

Contaminant Free

Produced in a temperature and humidity controlled environement, contamination from airborne particulates or moisture cannot reach the material during production. The extrusion machinery is cleaned after every run to guarantee each spool is free from imperfections.

 

Intelligently Wound Spooling

Each spool is perfectly wound by sofisticated electronics, placing each layer of filament side by side and with even tension. This results in a tangle free unwinding, eliminating failed prints caused by crossed over filament.

 

Remaining Filament Estimator

The clear spools have markings on the sides, indicating the length of filament remainging. This allows you to quickly judge if you have sufficient material to complete a job. 

 

Large Centre Hub

The uniquely designed spool has a large centre hub that reduces the radial stress on the filament. This greatly reduces the tendancy to "pig tail" when you get close to the end of the roll. This can be especially apparent with 2.85mm PLA. 

 

 

 

(FFS-PLA-DKGREY)

SKU FFS-PLA-DKGREY
Brand Filaform
Shipping Weight 1.3500kg
Shipping Width 0.210m
Shipping Height 0.070m
Shipping Length 0.210m
Shipping Cubic 0.003087000m3

Filaform Select Dark Grey PLA 1kg 1.75mm

By: on 18 March 2019
It prints very well but for a 'dark' grey its rather light
(5)

Review Title

By: on 11 January 2019
I love having a large spool and this was the cheapest I've seen PLA available anywhere! After adjusting my ender 3 profile properly I'm getting amazing results using this plastic at 0.1mm resolution. Delivery and everything came in just under a week.
(5)

Write a product review