Filaform Select ABS

ABS (Acrylonitrile Butadiene Styrene) is one of the most commonly used, and most versitile materials available for 3D printing today. Filaform Select ABS is a strong and very rigid plastic perfect for prototyping and end use parts.


Contaminant Free

Produced in a temperature and humidity controlled environement, contamination from airborne particulates or moisture cannot reach the material during production. The extrusion machinery is cleaned after every run to guarantee each spool is free from imperfections.


Intelligently Wound Spooling

Each spool is perfectly wound by sofisticated electronics, placing each layer of filament side by side and with even tension. This results in a tangle free unwinding, eliminating failed prints caused by crossed over filament.


Remaining Filament Estimator

The clear spools have markings on the sides, indicating the length of filament remainging. This allows you to quickly judge if you have sufficient material to complete a job. 


Large Centre Hub

The uniquely designed spool has a large centre hub that reduces the radial stress on the filament. This greatly reduces the tendancy to "pig tail" when you get close to the end of the roll. This can be especially apparent with 2.85mm PLA. 





Brand Filaform
Shipping Weight 1.3500kg
Shipping Width 0.210m
Shipping Height 0.070m
Shipping Length 0.210m
Shipping Cubic 0.003087000m3

Great service and prompt delivery

By: on 6 August 2017
Great service and prompt delivery

Nice and quick delivery, good

By: on 30 July 2017
Nice and quick delivery, good product.

This is great quality. It

By: on 30 July 2015
This is great quality. It prints very nicely and support material is VERY easy to remove. It has a very slight shine, and the colour isn't too bright - fine details are very easy to see.

The orange abs filament is

By: on 2 January 2015
The orange abs filament is great, it Extrudes nicely and when put in a vapor chamber it smoothes off great.

Write a product review