Filaform Select Orange PLA 1kg (1.75mm/2.85mm)
- Express Dispatch
- Australian Owned & Operated
- Money Back Guarantee
- Quality Assured Products
Filaform Select PLA
PLA (Poly-Lactic Acid in full) is a bio-degradable plastic derived from plant based sources such as corn starch. Possibly the most popular desktop 3D printing material due to it's ease of use. It doesn't require a heated bed, has almost no warping and gives off a sweet smell when printing.
Contaminant Free
Produced in a temperature and humidity controlled environement, contamination from airborne particulates or moisture cannot reach the material during production. The extrusion machinery is cleaned after every run to guarantee each spool is free from imperfections.
Intelligently Wound Spooling
Each spool is perfectly wound by sofisticated electronics, placing each layer of filament side by side and with even tension. This results in a tangle free unwinding, eliminating failed prints caused by crossed over filament.
Remaining Filament Estimator
The clear spools have markings on the sides, indicating the length of filament remainging. This allows you to quickly judge if you have sufficient material to complete a job.
Large Centre Hub
The uniquely designed spool has a large centre hub that reduces the radial stress on the filament. This greatly reduces the tendancy to "pig tail" when you get close to the end of the roll. This can be especially apparent with 2.85mm PLA.
(FFS-PLA-ORANGE)
SKU | FFS-PLA-ORANGE |
Brand | Filaform |
Shipping Weight | 1.3500kg |
Shipping Width | 0.210m |
Shipping Height | 0.070m |
Shipping Length | 0.210m |
Shipping Cubic | 0.003087000m3 |
The Filaform PLA filament is
By: Katherine B. on 14 September 2017The Filaform PLA filament is a great product. The orange is a vibrant colour and prints nicely.
(4)
Great quality filament and excellent
By: Michael S. on 29 July 2017Great quality filament and excellent shipping
(5)
Very inconsistent gauge. Oozes like
By: Benjamin L. on 31 October 2016Very inconsistent gauge. Oozes like nothing else ive printed. Very difficult to get good prints with this filament. Please advice on print settings if you know how I could get better results. So far used half the spool on benchys trying to get my profile right for it.
(1)
3DPrintergear Response
Hi, Sorry to hear you are experiencing problems. Could you please email me at info@3dprintergear.com.au and let me know what diameters you are seeing ? This could be a defective roll, which we would be happy to replace.
Fast shipping, product was as
By: David R. on 15 August 2016Fast shipping, product was as described. Great customer experience as always.
(5)
I'll keep coming back. Great
By: Michael S. on 5 April 2016I'll keep coming back. Great quality and service
(5)