Filaform Select ABS

ABS (Acrylonitrile Butadiene Styrene) is one of the most commonly used, and most versitile materials available for 3D printing today. Filaform Select ABS is a strong and very rigid plastic perfect for prototyping and end use parts.


Contaminant Free

Produced in a temperature and humidity controlled environement, contamination from airborne particulates or moisture cannot reach the material during production. The extrusion machinery is cleaned after every run to guarantee each spool is free from imperfections.


Intelligently Wound Spooling

Each spool is perfectly wound by sofisticated electronics, placing each layer of filament side by side and with even tension. This results in a tangle free unwinding, eliminating failed prints caused by crossed over filament.


Remaining Filament Estimator

The clear spools have markings on the sides, indicating the length of filament remainging. This allows you to quickly judge if you have sufficient material to complete a job. 


Large Centre Hub

The uniquely designed spool has a large centre hub that reduces the radial stress on the filament. This greatly reduces the tendancy to "pig tail" when you get close to the end of the roll. This can be especially apparent with 2.85mm PLA. 





Brand Filaform
Shipping Weight 1.3500kg
Shipping Width 0.210m
Shipping Height 0.070m
Shipping Length 0.210m
Shipping Cubic 0.003087000m3

Great and very quick delivery

By: on 11 September 2017
Great and very quick delivery

Prompt efficient service as per

By: on 17 July 2017
Prompt efficient service as per normal.

Filaform is by far my

By: on 7 April 2017
Filaform is by far my favourite ABS, it prints at a higher temperature so it works well through UP! printers to produce detailed and strong parts.

Great. Very quick delivery.

By: on 20 August 2016
Great. Very quick delivery.

Arrived promptly. Worked beautifully. I'll

By: on 4 November 2014
Arrived promptly. Worked beautifully. I'll be back.

Write a product review