Flexion For E3D Hotend

3D printer extruder retrofit kit for E3D v6 hotend (1.75mm). This allows the use of the Flexion Extruder with the excellent E3D hotends – enabling precision extrusion of virtually every available filament from Nylon to ultra-flexible Shore 50A. This uses the same mounting hole pattern as the E3D extruder, and also has a couple mounting holes in the front (see drawing). It includes a PTFE tube cut to length for the E3D v6 hotends. So you’ll have all the same advantages of precision, supported, reliable filament driving with the flexibility to print at much higher temperatures. This kit is appropriate for RepRap and Lulzbot printers as well as the Prusa Mk2.


  • Flexion extruder
  • E3D mounting block
  • Precision cut PTFE guide tube (plus a spare), and alignment collar.
  • Clamp plate and mounting screws
  • Spare brush
  • Spare nozzles: 0.2, 0.3, 0.4, and 0.5mm orifice


Note: E3D Hotend and extruder motor are not included. 


Brand Flexion
Shipping Weight 0.1200kg
Shipping Width 0.100m
Shipping Height 0.030m
Shipping Length 0.130m


By: on 21 October 2018
works like a dream, big improvement in print quality

Write a product review