Flexion High Temp Dual Bundle Kit

Sold either as an upgrade for current Flexion owners, or as a bundle with the standard Flexion kit. Allows printing at temperatures up to 290°C to allow Nylon and Polycarbonate. Improved PLA performance. Fast hotend swapping. Works with all the same printers as the standard Flexion kits.

High-temp bundle for dual extruder kits. Get the best of both worlds with one standard Flexion hotend, and one FlexionHT hotend. The finned mounting block replaces the standard block. Includes a variety of nozzles.
Full parts list:
FINNED mounting block
2x Tensioning arm with idler and cleaning brush (one right and one left)
2x Adjustment cam
2x Drive gear
1x Flexion barrel
1x FlexionHT barrel
2x Heater block
2x Silicone insulation for heater block
6 nozzles – 0.2, 0.3, 2x 0.4, 0.5, 0.8 mm orifice
2x Adapter shim to allow 6mm and 0.25″ heater cartridges
4 PTFE feed tubes
2 spare cleaning brushes
All mounting hardware
6mm and 7mm wrench for installing nozzles
“Flexion inside” quick-guide sticker

  • Better thermal performance
  • Visibility of extruder (you can remove your stock heatsink – but continue to use the fan)
  • Easy removal of the hotend without disassembling the motor and extruder (tool access between fan blades)

 

HT comparison

 

This kit requires you to disassemble your printer's extruder and reinstall this upgrade.

Note: does not include stepper motor or motor mounting screws

(FLEX-EXT-HTDUAL-BUND)

SKU FLEX-EXT-HTDUAL-BUND
Brand Flexion
Shipping Weight 0.1200kg
Shipping Width 0.100m
Shipping Height 0.030m
Shipping Length 0.130m

FLEXION HIGH TEMP DUAL BUNDLE KIT

By: on 7 April 2020
Kit was supplied in a very small box (for the price I imagined an impressive package). The packaging is very well designed and the parts of the kit beautifully engineered. A long way from the standard Mk8's etc. Fitting the kit to a FF Creator pro was very straight forward with the necessary tools supplied. I found FF's instructions on the website and U tube video very helpful and clear. No instructions were contained in the kit. My fist prints with PLA were flawless out of the box but some fiddling with the tension screw setting have been necessary for ABS. I'm very impressed with this kit as an upgrade and expect it will provide good service once dialed in.
(5)

Write a product review