Flexion Rep2x Dual Extruder Kit

Flexible filament extruder retrofit kit for dual-extruder direct-drive machines, such as Makerbot Replicator 2X or Flashforge Creator. The Flexion extruder will allow full-speed printing of ultra-flexible filaments. The precision machined components allow your printer to push on filament harder, achieve high pressure in the nozzle, and control feed rates very closely. The self-cleaning drive will keep your long prints from failing due to a clogged drive. Works will with Ninjaflex, Filaflex, flexible PLA, TPU, TPE ultra-flexible filament down to 50 Shore A, and all the standard rigid filaments like ABS and PLA..


This kit requires you to disassemble your printer's extruder and reinstall this upgrade.


Compatible with the Flashforge Creator Pro and other clones.



Kit Includes

Mounting block
2x Tensioning arm with idler and cleaning brush (one right and one left)
2x Adjustment cam
2x Drive gear
2x Feed barrel
2x Heater block
2x Insulation for heater block
8 nozzles – 2 each 0.2, 0.3, 0.4, 0.5 mm orifice
2x Adapter shim to allow 6mm and 0.25″ heater cartridges
4 PTFE feed tubes
2 spare cleaning brushes
All mounting hardware
6mm and 7mm wrench for installing nozzles
“Flexion inside” quick-guide sticker

Note: does not include stepper motor or motor mounting screws


Brand Flexion
Shipping Weight 0.1500kg
Shipping Width 0.150m
Shipping Height 0.030m
Shipping Length 0.130m
Shipping Cubic 0.000585000m3

An excellent extruder, delivered quickly

By: on 18 February 2017
An excellent extruder, delivered quickly

Great products especially the flexion

By: on 9 September 2016
Great products especially the flexion extruder which is a must for soft flexible filaments. Postage was free and arrived in good time thanks

Write a product review