PEEK 0.5kg 1.75mm

PEEK 0.5kg 1.75mm

PEEK (PolyEtherEtherKetone) is a high performance thermopolymer. It is resistant to high temperatures, up to 250C, as well as being resistant to many chemicals.

Due to the high temperatures required to print PEEK it can be a very challenging material to work with. We suggest an extrusion temperature of 400C and a bed temperature of at least 130C and heated chamber if available. Even under these conditions large parts can be challenging to print due to warping.

The final product can also be annealed to further improve the prints properties.

PEEK, like many materials absorbs moisture, so it needs to be stored in a moisture free air tight container with desiccant.

(INT-PEEK-0.5-1.75)

Suggested 3D Printing Temperature

390-410 C

Suggested 3D Printing Speed

30-40 mm/s

Heated Bed Temperature

120-160 C

Heated Chamber Temperature

90-180 C

Build Platform

We have found that printing directly onto glass with several layers of PVA glue works the best. We also advise the use of a raft.

It is also important to remove the part while the bed is still hot, otherwise the different contraction rates will cause the glass to chip or break.

SKU

INT-PEEK-0.5-1.75

Be The First To Review This Product!

Help other Helix Imports Pty Ltd T/AS 3DPrintergear users shop smarter by writing reviews for products you have purchased.

Write a product review

Description

PEEK 0.5kg 1.75mm

PEEK (PolyEtherEtherKetone) is a high performance thermopolymer. It is resistant to high temperatures, up to 250C, as well as being resistant to many chemicals.

The final product can also be annealed to further improve the prints properties.

PEEK, like many materials absorbs moisture, so it needs to be stored in a moisture free air tight container with desiccant.

(INT-PEEK-0.5-1.75)