Taulman 230 Nylon 

 

A low temperature nylon developed specifically for 3D printing on systems that have cold print beds and lower temp capabilities.

 

Potential uses:

  • Gears – light load
  • Fan blades
  • Housings
  • Phone covers
  • Protective covers/enclosures.
  • Cosmetics containers

(T3D-230)

SKU T3D-230
Brand Taulman3D
Shipping Weight 0.9500kg
Shipping Width 0.210m
Shipping Height 0.080m
Shipping Length 0.220m

We have a heap of

By: on 26 May 2016
We have a heap of failed prints from the Nylon 230 (at 230-232 degrees). I suspect it's too soft for the stock stepper wheels to grip reliably, and prints fail part way through due to the extruder failing to extrude (on a flashed Da Vinci). It also seems to vary in thickness from 1.6mm to 1.9mm which is a bit out of spec but I don't think this is the main issue. We've now gone to Nylon Bridge at 238-244 degrees and not had any failures with the same drive wheels. As always, 3d Printer Gear provide excellent service and of course this does not reflect on them.
(2)

Write a product review

We Also Recommend