Taulman Alloy 910 Nylon 

Taulman's Alloy 910 filament is designed to be extremely strong without any composite fillers. The intention behind it was to make "The perfect filament for high-performance 3D printing". It is a high quality filament that is easy to print with, making it ideal for applications such as industrial parts and robotics.


According to Taulman, the material has "A combined tensile strength higher than the strongest co-polyesters, the druability of Nylons, a shrinkfactor that rivals Taulman's T-Glase, a vast range of chemical resistance, and a 95°C working range." At the same time it is designed to be used with ease and printible at 245°C. Having no fillers means that this filament is a pure plastic that is very versatile, but doesn't need any special treatment or skill.


The following specifications have been provided by Taulman:

  • Tensile Strength = 8,100PSI +
  • Modulus PSI = 72,932
  • Max Elongation at break = 31%
  • Print Temperature = 245° C
  • Nozzle size = Any – There are no particulates or additives in Alloy 910
  • Tg = 90° C
  • Shrinkage = 0.0031 in/in
  • Transmission = 50%
  • Color = Subtle Amber – May be dyed with acid based dyes.



SKU T3D-A910
Brand Taulman3D
Shipping Weight 0.9500kg
Shipping Width 0.210m
Shipping Height 0.080m
Shipping Length 0.220m

Alloy 910

By: on 3 July 2019
Done my first prints with Alloy 910. Once settings where dialed in. Printed gears that come out as good as moulded ones. Very impressed with how tough this material is. Great layer adhesion and almost no layer lines. Wow. Will purchase again.

Good service, keep up the

By: on 13 November 2015
Good service, keep up the good work.

I print all my high

By: on 25 October 2015
I print all my high strength parts with Alloy, including all parts for my drone. Taulman's Nylons are almost all I print with since upgrading my Velleman K8200

Jamie suggested Taulman 910 for

By: on 3 September 2015
Jamie suggested Taulman 910 for my project and he was dead on with his suggestion, thanks Jamie

Great tough material! Prints easily,

By: on 9 August 2015
Great tough material! Prints easily, minimal warping, great layer bonding, will flex significantly before breaking, fairly good stiffness (not as stiff as PLA).

Write a product review