UP Plus 3D Printer Enclosure

 

This enclosure bolts to the side frame of the UP Plus and UP Plus 2 helping to maintain a consistant temperature.

All parts needed to complete the enclosre can be printed on an UP printer. Or you can opt to have the parts made for you at an addition cost. ( please contact us for this)

There is no active heating in this kit, but the internal temperature during printing can reach up to 55 C depending on the printing time, settings and ambient temperature.

 
For convenience the bottom front panel swings out to allow for easy removal of plastic scraps that have accumulated.



The advantages.

 
  • Reduced warping
  • Greater part strength.
  • Reduced de-lamination of layers.
  • Faster warm up times.
  • Greater print consistency

 

What's included in the kit?
 
  • All the frames and door pieces.
  • Nuts and bolts.
  • All printed part files in UP3 format
  • Temperature guage 

 

What's needed to complete.

 

  • UP Plus printer
  • Super glue
  • 3mm allen key wrench

 

(UP-ENC)

SKU UP-ENC
Brand PP3DP - UP
Shipping Weight 4.9000kg

Excellent Product.

By: on 5 July 2016
Using this enclosure has dramatically improved my printing. No more lifting or warping with ABS. Highly recommended.
(5)

Couldn't print without it!

By: on 4 November 2014
Before I bought this enclosure I was heating the entire room just to get a print to work, since setting it up I have much greater flexibility in design and orientation. It has meant that, with a bit of bubble wrap insulation, I was able to print throughout the Melbourne winter outside in the garage. Try getting a print out of your UP Plus 2 at 6 degrees without it! When I was looking for an enclosure I did quite a bit of research and found that this was by far the best design available and I was very impressed when the bits arrived and it assembled brilliantly. I highly recommend it, especially if you are printing at least a moderate amount.
(5)

The UP Printer enclosure is

By: on 28 August 2014
The UP Printer enclosure is a must in the classroom to protect the students from the hot extruder and platform. The cover fits perfectly and being clear ensures that we can still observe the printing process. Sue Green
(5)

3DPrintergear Response
Thanks Sue, glad the enclosure is working well.

Write a product review