Zortrax M200 3D Printer



With the Zortrax M200 you buy a powerful plug&play 3D printer. This machine is built very solid, easy to use and offers you an excellent 3D printing experience. The M200 is set up very fast. Operating this device is easy due to its user-friendly interface and slicing software.



Main features of Zortrax M200:

  • High precision (up to 0,09mm/layer)
  • Perforated build bed (200 x 200 x 180 mm)
  • High manufacturing speed (up to 150 mm/second)
  • Compatible for use of third party filaments
  • Plug&play 3D printer
  • Easy-to-use slicing software (Z-Suite)



Properly selected heating and cooling points in the extruder solve the frequent problem of inability to release material by the extruder. It can be caused by a change in the physical properties of material associated with temperature.


Build platform

The use of a two-part platform allows an easy removal of the build platform after the 3D printing process is finished. Thanks to this feature, the finished 3D model can be easily removed without causing any calibration issues or damaging of the component. Perforations on the platform allows to 3D print using materials based on ABS which tend to warp. They prevent the model from peeling off during additive manufacturing process. Additionally, an extra layer of raft is used as a special base for the object. This is very important for 3D printing large models. The build platform is heated to the correct temperature for each type of filament. With the new Z-Suite slicer software you can set the bed temperature for third-party filaments on your own. Furthermore, the Zortrax M200 allows a wide range of temperatures (from 20° C to 110° C) to 3D print using many kinds of materials.



This 3D printer is fitted with an innovative calibration system which makes sure that the platform is leveled correctly every time. There are five calibrating points located on the platform itself which calculate its exact position. The system can determine on which level the calibrating points should be located. In the case of a slight tilt the extruder adapts to the position of the platform while its putting on the first layers of the model. We recommend to level the Zortrax M200 after transportation. Simply follow the instructions on the screen and your build platform will be leveled in under 5 minutes. Until you move the 3D printer no further calibration will be needed.


X and Y axis system

A system of dual X and Y axises leads the extruder with high precision. Stability and quality of 3D printing is greatly improved by using 8 smooth rods. The build platform moves very smooth and without vibration which is a key factor for good-quality 3D prints.


Single Extruder Support

Creating support structure is easy thanks to Single Extruder Support system (SES). This feature allows to 3D print support structure for complex models without the need of dual extruder and additional material. Support structure is easy to remove and efficient. The system is optimized to use only the exact amount of material needed to support the model.


Compatible materials

We recommend to 3D print using Z-Filaments with features dedicated for Zortrax® M200. When you use these filaments good manufacturing results are guaranteed. If you like to experiment with materials we suggest to use Filaform Select filaments for good-value and safe 3D printing.


Option for an enclosed building chamber with HEPA filter

If you are working with ABS or materials which tend to warp we advise you to upgrade your Zortrax M200 with side covers and covering. This keeps your build chamber warm and minimizes warping. As well as filter out potentially harmful odours.



Technical details


Physical dimensions

Without spool:                                            345 x 360 x 430 mm (13.6 x 14 x 16.9 in)

With spool:                                                345 x 430 x 430 mm (13.6 x 17 x 16.9 in)

Shipping box:                                             460 x 470 x 570 mm (18.1 x 18.5 x 22.4 in)

Weight:                                                     13 kg (28.7 lbs)

Shipping weight:                                         20 kg (44 lbs)



Ambient Operation Temperature:                  15°-35° C (60°-95° F)

Storage Temperature:                                  0°-35° C (32°-95° F)



AC input:                                                    110/240V ~ 2 A 50/60 Hz

Power requirements:                                    24 V DC @ 11 A

Power consumption:                                     ~ 190W

Connectivity:                                               SD card (included)



Print technology:                                         LPD™ - Layer Plastic Deposition

Build volume:                                              200 x 200 x 185 mm (7.87 L x 7.87 W x 7.28 H in)

Layer resolution settings:                              Advanced: 25-50* microns (0.000984-0.0019685 in)

                                                                 Standard: 90-400 microns (0.003543-0.015748 in)

Wall thickness                                             Minimal: 400 microns, Optimal: 800+ microns

Resolutution of single printable point              400+ microns

Filament Diameter                                        1.75 mm (0.069 in)

Filament Type                                              Z-Filaments™

Nozzle diameter:                                          0.4 mm (0.015 in)

Minimum single positioning:                           1.5 microns

Positioning precision X/Y:                               1.5 microns

Z single step:                                                1.25 microns

Extruder maximum temperature:                    380° C (716° F)

Heated platform maximum temperature:          110° C (230° F)




Software bundle:                                          Z-Suite®

File types:                                                   .stl  .obj  .dxf

Supports:                                                    Mac OS X / Windows XP, Windows Vista, Windows 7, Windows 8




SKU Z-M200
Brand Zortrax
Shipping Weight 20.0000kg

Initial hiccups with my M200

By: on 20 September 2015
Initial hiccups with my M200 printing a little hot out of the box but great support from Jamie as always to resolve issues. Would I buy another Zortrax? Definitely! Despite this issue the quality is outstanding and once fixed the results and reliability is outstanding. To put this in perspective I have been printing professionally with some of the best commercial and reprap printers since mid 2011 so I’m pretty hard to impress… colour me impressed with the Zortrax M200.

Very happy with the Zortrax.

By: on 8 September 2015
Very happy with the Zortrax. Easy to assemble and easy to start printing. Awesome high quality prints with a minimal of fuss. The only trap for new players that caught me out was that it doesn't come with the windows as part of the pack. A very minor, but important note. Overall extremely happy with it so far

The product is amazing. The

By: on 2 September 2015
The product is amazing. The delivery was way so fast.

Loving the Zortax

By: on 16 April 2015
The Zortrax is the best printer I have used so far. Simple to set up and so easy to use, with fantastic quality print. Have not had a printing issue yet! Thanks Jamie for the quick delivery. Couldn't believe it when it arrived so soon after ordering.

In less than an hour

By: on 13 March 2015
In less than an hour from unboxing, I had started on a productive print. Quality is better than expected. Easy to use. Good value.

3DPrintergear Response
Hi Gary, Thanks for the great review and glad you are having success with your printing.

Write a product review

We Also Recommend