Zortrax M200 3D Printer + Side Panels


No matter if you’re a student, a designer or an engineer at some point you stumbled upon the need to make an idea real. Zortrax M200 allows you to do just that. You can create high precision, durable models of any shapes and in 11 Z-ABS colors. 





Zortrax M200 extruder


An all metal extruder capable of 380°C and a carefully designed transition region assure trouble free printing with a range of materials. 














Zortrax M200 build platform

The use of a two-part platform allows for easy removal after the print has finished. Thanks to this feature the model can be easily removed without causing any calibration issues. Perforations on the platforrm ensure the part stays flat and prevent the part from peeling off during the printing process. The platform is heated to the correct temperature for each type of filament, with a wide range of temperatures (from 20 C to 110 C).













AUTO - CALIBRATIONZortrax M200 auto calibration

The printer is fitted with an innovative calibration system which makes sure that the platform is levelled correctly every time. There are calibration points located on the platform itself which calculate its exact position. The system is able to determine if the platoform has a slight tilt and the extruder can then adapt to the position of the platform while it's putting down the first layers.










X AND Y SYSTEMZortrax M200 gantry

A system of dual X and Y axises is used to move the extruder with high precision. Stability and quality of printing is greatly improved throught the use of 8 smooth rods.












Intelligent support creation allows support structures for complex models wihtout the need of dual exturders or additional material. Support structures are efficient and easy to remove. The system is optimized to use only the exact amount of material needed to support the model.














Technical details


Physical dimensions

Without spool:                                            345 x 360 x 430 mm (13.6 x 14 x 16.9 in)

With spool:                                                345 x 430 x 430 mm (13.6 x 17 x 16.9 in)

Shipping box:                                             460 x 470 x 570 mm (18.1 x 18.5 x 22.4 in)

Weight:                                                     13 kg (28.7 lbs)

Shipping weight:                                         20 kg (44 lbs)



Ambient Operation Temperature:                  15°-35° C (60°-95° F)

Storage Temperature:                                  0°-35° C (32°-95° F)



AC input:                                                    110/240V ~ 2 A 50/60 Hz

Power requirements:                                    24 V DC @ 11 A

Power consumption:                                     ~ 190W

Connectivity:                                               SD card (included), *WiFi



Print technology:                                         LPD™ - Layer Plastic Deposition

Build volume:                                              200 x 200 x 185 mm (7.87 L x 7.87 W x 7.28 H in)

Layer resolution settings:                              Advanced: 25-50* microns (0.000984-0.0019685 in)

                                                                 Standard: 90-400 microns (0.003543-0.015748 in)

Wall thickness                                             Minimal: 400 microns, Optimal: 800+ microns

Resolutution of single printable point              400+ microns

Filament Diameter                                        1.75 mm (0.069 in)

Filament Type                                              Z-Filaments™

Nozzle diameter:                                          0.4 mm (0.015 in)

Minimum single positioning:                           1.5 microns

Positioning precision X/Y:                               1.5 microns

Z single step:                                                1.25 microns

Extruder maximum temperature:                    380° C (716° F)

Heated platform maximum temperature:          110° C (230° F)




Software bundle:                                          Z-Suite®

File types:                                                   .stl  .obj  .dxf

Supports:                                                    Mac OS X / Windows XP, Windows Vista, Windows 7, Windows 8


* available in future update


Brand Zortrax
Shipping Weight 20.0000kg

Best Printer 10/10

By: on 13 January 2017
Best Printer 10/10

Highly recommended - excellent service

By: on 20 December 2016
Highly recommended - excellent service and communication - thanks for everything

Fantastic service!

By: on 9 November 2016
Fantastic service!

Excellent product, easy to assemble

By: on 27 September 2016
Excellent product, easy to assemble and ready to print out of the box ! The M200 3D printer can be improved and customised with printable parts (cable clips and tool holder) available and free from the online Zortrax library.

Good Product, Good Service

By: on 4 July 2016
Good Product, Good Service

Write a product review