Zortrax M200 3D Printer + Side Panels

Zortrax M200 3D Printer and Side Panels

More details

ZM200SP
New product

$2,795.00

In Stock ready to ship!

- +

Add to wishlist

Estimate shipping cost

Pack content

 
More info

For a limited time receive a free panel kit when you order a Zortrax M200!

A PROFESSIONAL 3D PRINTER NOT JUST FOR PROFFESSIONALS

No matter if you’re a student, a designer or an engineer at some point you stumbled upon the need to make an idea real. Zortrax M200 allows you to do just that. You can create high precision, durable models of any shapes and in 11 Z-ABS colors. 

 

 

 

Zortrax M200 extruder

EXTRUDER

An all metal extruder capable of 380°C and a carefully designed transition region assure trouble free printing with a range of materials. 

 

 

 

 

 

 

 

 

 

 

 

 

BUILD PLATFORM 

Zortrax M200 build platform

The use of a two-part platform allows for easy removal after the print has finished. Thanks to this feature the model can be easily removed without causing any calibration issues. Perforations on the platforrm ensure the part stays flat and prevent the part from peeling off during the printing process. The platform is heated to the correct temperature for each type of filament, with a wide range of temperatures (from 20 C to 110 C).

 

 

 

 

 

 

 

 

 

 

 

 

AUTO - CALIBRATIONZortrax M200 auto calibration

The printer is fitted with an innovative calibration system which makes sure that the platform is levelled correctly every time. There are calibration points located on the platform itself which calculate its exact position. The system is able to determine if the platoform has a slight tilt and the extruder can then adapt to the position of the platform while it's putting down the first layers.

 

 

 

 

 

 

 

 

X AND Y SYSTEMZortrax M200 gantry

A system of dual X and Y axises is used to move the extruder with high precision. Stability and quality of printing is greatly improved throught the use of 8 smooth rods.

 

 

 

 

 

 

 

 

 

SINGLE EXTRUDER SUPPORT Zortrax M200 support

Intelligent support creation allows support structures for complex models wihtout the need of dual exturders or additional material. Support structures are efficient and easy to remove. The system is optimized to use only the exact amount of material needed to support the model.

Technical details

 

Physical dimensions

Without spool:                                            345 x 360 x 430 mm (13.6 x 14 x 16.9 in)

With spool:                                                345 x 430 x 430 mm (13.6 x 17 x 16.9 in)

Shipping box:                                             460 x 470 x 570 mm (18.1 x 18.5 x 22.4 in)

Weight:                                                     13 kg (28.7 lbs)

Shipping weight:                                         20 kg (44 lbs)

 

Temperature

Ambient Operation Temperature:                  15°-35° C (60°-95° F)

Storage Temperature:                                  0°-35° C (32°-95° F)

 

Electrical

AC input:                                                    110/240V ~ 2 A 50/60 Hz

Power requirements:                                    24 V DC @ 11 A

Power consumption:                                     ~ 190W

Connectivity:                                               SD card (included), *WiFi

 

Printing

Print technology:                                         LPD™ - Layer Plastic Deposition

Build volume:                                              200 x 200 x 185 mm (7.87 L x 7.87 W x 7.28 H in)

Layer resolution settings:                              Advanced: 25-50* microns (0.000984-0.0019685 in)

                                                                 Standard: 90-400 microns (0.003543-0.015748 in)

Wall thickness                                             Minimal: 400 microns, Optimal: 800+ microns

Resolutution of single printable point              400+ microns

Filament Diameter                                        1.75 mm (0.069 in)

Filament Type                                              Z-Filaments™

Nozzle diameter:                                          0.4 mm (0.015 in)

Minimum single positioning:                           1.5 microns

Positioning precision X/Y:                               1.5 microns

Z single step:                                                1.25 microns

Extruder maximum temperature:                    380° C (716° F)

Heated platform maximum temperature:          110° C (230° F)

 

 

Software

Software bundle:                                          Z-Suite®

File types:                                                   .stl  .obj  .dxf

Supports:                                                    Mac OS X / Windows XP, Windows Vista, Windows 7, Windows 8

  

* available in future update

 
Reviews

2 Other products in the same category

Customers who bought this product also bought: