Flexion Dual Bundle Kit

Sold either as an upgrade for current Flexion owners, or as a bundle with the standard Flexion kit. Improved PLA performance. Fast hotend swapping. Works with all the same printers as the standard Flexion kits.

The finned mounting block replaces the standard block. Includes a variety of nozzles.
Full parts list:
FINNED mounting block
2x Tensioning arm with idler and cleaning brush (one right and one left)
2x Adjustment cam
2x Drive gear
2x Flexion barrel
2x Heater block
2x Silicone insulation for heater block
6 nozzles – 0.2, 0.3, 2x 0.4, 0.5, 0.8 mm orifice
2x Adapter shim to allow 6mm and 0.25″ heater cartridges
4 PTFE feed tubes
2 spare cleaning brushes
All mounting hardware
6mm and 7mm wrench for installing nozzles
“Flexion inside” quick-guide sticker

• Better thermal performance
• Visibility of extruder (you can remove your stock heatsink – but continue to use the fan)
• Easy removal of the hotend without disassembling the motor and extruder (tool access between fan blades)

This kit requires you to disassemble your printer's extruder and reinstall this upgrade.

Note: does not include stepper motor or motor mounting screws

(FLEX-EXT-DUAL-BUND)