Bambu Lab PETG

 

PETG (Polyethylene Terephthalate Glycol) filament is known for its excellent layer adhesion, high impact resistance, and good durability, making it suitable for functional prototypes, mechanical parts, protective components, and other applications that require a good balance of strength and flexibility.

Bambu Lab PETG filament is designed to offer consistent and reliable printing performance. It is available in various colors to meet different project requirements. PETG filament typically prints at a moderate temperature and does not require a heated bed, making it easier to use for most 3D printers.

 

Recommended Printing Settings

 

Drying Settings before Printing	65 °C, 6 h
Printing and Keeping Container's Humidity	< 50% RH (Sealed, with Desiccant)
Nozzle Temperature	220 - 250 °C
Bed Temperature (with PVP Glue)	60 - 80 °C
Printing Speed	< 300 mm/s

 

Physical Properties

 

	Density	1.27 g/cm³
	Vicat Softening Temperature	85 °C
	Heat Deflection Temperature	70 °C
	Melting Temperature	250 °C
	Melt Index	16.5 ± 2.0 g/10 min

 

Mechanical Properties

 

Tensile Strength	50 ± 2 MPa
Breaking Elongation Rate	120 ± 10 %
Bending Modulus	2200 ± 100 MPa
Bending Strength	75 ± 3 MPa
Impact Strength	6.0 ± 0.5 kJ/m²

 

Smart Printing with RFID

 

With Bambu PETG, all the essential printing parameters are conveniently embedded in an RFID chip. This RFID chip can be read by our AMS (Automatic Material System), eliminating the need for manual configuration and tedious setup steps.

Simply load the filament onto the printer, and the AMS will automatically detect the material and retrieve the corresponding printing parameters from the RFID chip. This streamlined process saves you time and effort, allowing you to start printing right away without the hassle of adjusting settings.

Say goodbye to manual parameter input and enjoy a more seamless and efficient printing experience with Bambu PETG and our integrated AMS technology.

 

(48462)