3D Lac Plus Bed Adhesion Spray 100ml

Prevent warping with the new 3D Lac Plus bed adhesion spray designed specifically for PLA+, PETG, ABS, ASA, nylon and many more FDM based materials. 3D Lac has been tested on smooth and textured PEI bed platforms and works very well in both scenarios. 

Instructions: 

1. Ensure print surface is clean
2. Spray lightly onto the print base 
3. Print your model 
4. Wait for the platform to cool down (below 30 degrees C) and remove the completed model. 

(47619)