Polymaker Fiberon PPS-CF10 Black - 0.5kg

High quality and high performance Fiberon PPS-CF10 by Polymaker.

• High performance PPS-CF with 10% carbon fiber reinforcement.
• Flame retardant (UL94 V0) and exceptional chemical resistance
• Extreme heat resistance up to 250°C HDT after annealing.
• High bending modulus and tensile strength.
• Low moisture sensitivity for humidity or wet applications.
• Reliable and consistent tolerance (1.75mm diameter +/- 0.03mm

Fiberon™ PPS-CF10 displays the best mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallization during the printing process, an additional step is required: Annealing. PPS-CF10 can be annealed in the oven at 125°C for 16 hours.

Moisture insensitivity does not describe whether the filament should be kept dry for optimal print quality. This description of moisture insensitivity is in the context of the end-use application where extremely moisture sensitive materials like PA6-CF see a significant reduction in mechanical properties as the part absorbs moisture. With PPS-CF moisture absorption is minimal and doesn't impact the mechanical properties of the part. For best printing results PPS-CF should still be kept dry during printing and storage.

(FIB_PPS_CF_BLK)