BL Touch for use with auto-bed levelling. 

 

This is a 5-pin BL touch which includes the following:

• BL Touch Mechanical auto-bed levelling sensor 
• 2x mounting screws 
• 1x 80cm extension wires. 
• 1x spare probe

Depending on your printer type, you may need to print a mount for correct use. Don't forget to enable automatic bed levelling in your printer firmware or startup gcode function. If you need assistance with this, please contact us here.

 

Wire Functionality:

• White prob signal out
• Black GND
• Yellow servo signal in
• Red power +5V
• Brown power GND

 

(47604)