Formlabs Fast Model Resin (Form 4)

Formlabs’ fastest General Purpose resin for the Form 4 ecosystem — print dental models in minutes or large prototypes in under two hours, with crisp accuracy and a clean, reliable workflow.

Formlabs Fast Model Resin cartridge for Form 4
Category: General Purpose
Printer: Form 4 Series
Use Case: Models & Prototypes
Speed: Up to 100+ mm/hr class

Note: Fast Model Resin is engineered for maximum throughput. Use 200 µm settings for the fastest prints, or 100 µm for finer detail and surface finish.

Blazing-fast, accurate prints for models you can iterate on today

Formlabs Fast Model Resin is the next-generation evolution of Draft-class speed, designed to take full advantage of the Form 4 Series. Produce accurate dental models in minutes or large prototypes in under two hours — without sacrificing fit, edge definition, or consistency.

When you need maximum throughput for concept models, rapid design iterations, or thermoforming workflows, Fast Model Resin keeps your print queue moving with an efficient print + wash + cure routine.

Authorised Formlabs Reseller
Optimised for: Form 4 ecosystem

Why Choose Formlabs Fast Model Resin?

Fastest Formlabs Resin Class

Built for throughput — ideal when you need models and prototypes today, not tomorrow.

Optimised for Form 4

Leverages the Form 4 ecosystem to print significantly faster than prior Draft-class formulations while maintaining dependable accuracy.

Choose Speed or Detail

Use 200 µm settings for maximum speed, or 100 µm for more detailed models and improved surface quality.

Reliable, Simple Workflow

Efficient print + wash + cure steps for a repeatable process that scales from single parts to busy production queues.

Applications

Fast Model Resin is designed for rapid iteration where speed and accuracy matter most — perfect for high-volume model production and quick prototype cycles.

Consider Fast Model Resin for:

  • Dental models (including models for thermoforming workflows)
  • Initial prototypes and fast design validation
  • Large concept parts where turnaround time is critical
  • High-throughput model printing in labs, studios, and engineering teams

Tip: If you’re chasing maximum speed, start with 200 µm. If you need crisper margins or finer surface detail, switch to 100 µm.

Material Properties

Fast Model Resin is engineered as a speed-first material that still delivers accurate, consistent results suitable for demanding model workflows. For the full validated material properties, test methods, and recommended settings, refer to the TDS in the downloads section below.

*Note: Material performance varies with part geometry, orientation, printer settings, and post-processing. Always follow manufacturer documentation for validated parameters.

Workflow Overview

Fast Model Resin follows a straightforward print + wash + cure workflow. For best results and repeatability, use the manufacturer-recommended presets and handling guidance.

  • Print using the Fast Model Resin preset and your chosen layer thickness (100 µm or 200 µm).
  • Wash using compatible equipment and timings per the manufacturer guidance.
  • Cure using recommended curing settings for the Form 4 ecosystem.
  • Finish as needed (support removal, quick surface clean-up) for ready-to-use models.

FAQ

1) What is Fast Model Resin best for?

High-throughput printing of dental models and rapid prototypes where turnaround time is critical.

2) Should I print at 100 µm or 200 µm?

Use 200 µm for the fastest print speeds; use 100 µm when you want more detailed surfaces and finer feature reproduction.

3) Where can I find validated specs and safety info?

Download the TDS and SDS below. For printer handling and manufacturer operating guidance, use the included manufacturer instructions.

(70826)

SKU 70826
Brand Formlabs

Be The First To Review This Product!

Help other 3DPrintergear users shop smarter by writing reviews for products you have purchased.

Write a product review