Bambu ABS-GF

Bambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping. Glass fiber imparts a smooth matte finish with micro-spot gloss, blurring layer lines. ABS-GF is ideal for both mechanical parts and decorations due to the inherited water resistance, wear resistance, durability and vibrant colors.

Product Features

• Enhanced Strength and Stiffness
• Greater Dimensional Stability
• Fine Matte Finish
• Durability and Water Resistance
• Comes with High Temperature Reusable Spool
• Diameter: 1.75 mm +/- 0.03 mm

Cautions for Use

• 0.2 mm Nozzle Not Compatible
• Enclosure Printers Required
• AMS & AMS lite Compatible
• Dry Out Before Use

Enhanced Strength and Stiffness

ABS-GF outclasses regular ABS in strength and stiffness, making it perfect for load-bearing and bending-resistance parts.

 

	ABS	ABS-GF	Improvement %
Stiffness (Bending Modulus - XY)	1880 MPa	2860 MPa	52.1%
Strength (Bending Strength - XY)	64 MPa	68 MPa	6.3%
Layer Strength (Bending Strength - Z)	39 MPa	46 MPa	17.9%
Heat Resistance (HDT, 0.45 MPa)	87 °C	99 °C	13.8%

Greater Dimensional Stability

Glass fiber reinforcement gives ABS-GF better dimensional stability than regular ABS, minimizing warping and deformation during printing. This makes it ideal for intricate mechanical assembly parts or geometric components.

Specimen Test: Model size (L*W*H): 240*50*20 mm³ (the XY direction); Infill Density: 25%

Fine Matte Finish

The seamless matte finish, coupled with nearly invisible layer lines, gives ABS-GF a smooth appearance, making it ideal for decorative and fine-grained parts.

Water Resistance & Built to Last

With improved water resistance and durability, Bambu ABS-GF is ideal for printing long-lasting production and household items, like mechanical casings, connectors and molds.

Accessory Compatibility

	Recommended	Not Recommended
Build Plate	Engineering Plate, High Temperature Plate or Textured PEI Plate	Cool Plate
Hotend	Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mm	Hotend with Stainless Steel Nozzle (all size) Hotend with Hardened Steel Nozzle (0.2 mm)
Glue	Bambu Liquid Glue Glue Stick	/

 

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

 

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	80 °C, 8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	240 - 270 °C
Bed Temperature (with Glue)	80 - 100 °C
Printing Speed	< 180 mm/s

Physical Properties
Density	1.08 g/cm³
Vicat Softening Temperature	103 °C
Heat Deflection Temperature	99 °C
Melting Temperature	202 °C
Melt Index	7.56 ± 1.4 g/10 min

Mechanical Properties
Tensile Strength	36 ± 3 MPa
Breaking Elongation Rate	6.3% ± 1.2%
Bending Modulus	2860 ± 130 MPa
Bending Strength	68 ± 4 MPa
Impact Strength	14.5 ± 1.5 kJ/m²

 

(55281)