Bambu Lab Part Cooling Fan for H2S [FAF020]

Ensure crisp, high-detail prints on your Bambu Lab H2S  with the genuine Part Cooling Fan [FAF020], designed to work in tandem with the air duct at the toolhead base for optimal filament cooling.

Compatibility:

• H2S

SKU:

• FAF020

What’s Inside the Box:

• Part Cooling Fan × 1
• BT2-6.5 Screw × 1
• BT2-5 Screws × 2

Built from robust black plastic, this fan is suitable for fast, reliable operation and comes packaged in a compact 100 × 135 × 45 mm box weighing approximately 0.107 kg.

Installation & Maintenance: Ideal to replace if you notice unusual noise or reduced airflow from the toolhead. Replace by removing the old fan—loosening three screws—then reconnecting the plug and securing the new fan with its included screws. Always power off and disconnect your printer before starting maintenance. Detailed instructions are available in the Bambu Lab maintenance guides.

Available now at 3D Printer Gear, your trusted local supplier in Reservoir, Victoria, for authentic Bambu Lab parts and accessories.

(64869)