Bambu PPS-CF

PPS-CF is a composite material made from carbon fiber-reinforced polyphenylene sulfide. The combination of PPS resin and carbon fiber gives PPS-CF exceptional properties, including excellent resistance to solvents, corrosion, heat, and flames. Additionally, it offers superior strength, stiffness, and dimensional stability, making it a specialized engineering plastic that meets the demands of unique and challenging applications.

Cautions for Use

• For X1E Printing Only
• 0.2 mm Nozzle Not Compatible
• Stainless Steel Nozzle Not Recommended
• AMS & AMS lite NOT Compatible
• Must Be Dried before Use to Achieve Optimal Print Quality

 

Ultra-High Heat Resistance

PPS-CF boasts a heat deflection temperature of up to 264°C under 0.45 MPa and can continuously operate at temperatures exceeding 200°C. This significantly outperforms normal PA-CF materials, which have maximum temperatures around 190°C and 120°C. Its exceptional heat resistance ensures outstanding creep resistance, making PPS-CF ideal for demanding industrial environments and applications.

 

 

Solvent and Chemical Resistance

PPS-CF offers outstanding solvent and chemical resistance, second only to PTFE (Teflon). It remains virtually insoluble in any solvent below 200°C and exhibits exceptional resistance to acids, bases, and salts under normal conditions. This makes PPS-CF the ideal choice for challenging environments where chemical stability is critical.

 

Ultra-Low Water Absorption

With an extremely low moisture absorption rate of just 0.05%, PPS-CF ensures that its mechanical and thermal properties remain stable even in humid conditions. Unlike normal PA-CF, which can soften and degrade when exposed to moisture, PPS-CF maintains its strength and durability, making it the superior option for applications requiring high moisture resistance.

 

Parameters Comparison

 

Accessory Compatibility

 

Downloads

Filament TDS

Filament MSDS

Filament RoHS

UL 94 Test Report

 

Printing Tips

Bambu PPS-CF Printing Guidelines:

• Nozzle Temperature: Recommended range is 310 to 340°C.
• Chamber Temperature: Recommended range is 60 to 90°C.
• Tip: Using higher values within these ranges can enhance the mechanical properties of the printed parts, especially in the Z-direction.

 

Drying Recommendations:

• Drying Temperature:

In a blast drying oven: 100°C to 140°C for 8 to 12 hours.

On an X1 printer's heatbed: 110°C to 120°C for 10 to 12 hours (less effective than a blast drying oven).

• Important Note: Higher temperatures within the drying range yield better results, but do not exceed 160°C to avoid damaging the spool.
• Additional Information: For more details, refer to Printing tips for Engineering materials on WIKI.

 

Storage Tips:

• Storage Condition: To prevent the filament from absorbing moisture, use an airtight storage container with desiccant during printing.
• For Further Details: Please refer to Printing tips for Engineering materials on WIKI.

 

Annealing Prints:

• If you need to anneal the prints, please refer to the Technical Data Sheet (TDS) and the WIKI section Work After Printing Finished.

(64432)