Prusa HT90 PA Nylon Powder-coated Print Sheet

Double-sided powder-coated PA Nylon spring steel print sheet for the Prusa Pro HT90, designed for printing polyamide-based filaments.

Notes

Suitable for polyamide-based materials and PETG. Other filaments may not adhere reliably.
No glue stick required; clean using only water or a drop of mild dishwashing detergent for grease.
Not to be cleaned with IPA or acetone. These agents can damage the surface.
Consumable part: normal wear such as glossier surface or minor dull spots does not affect performance and is not a warranty issue.
Visible probe marks may be present.

Refer to the Prusa Knowledge Base repair manual for your model at help.prusa3d.com.

(50450)

Help other 3DPrintergear users shop smarter by writing reviews for products you have purchased.

Double-sided powder-coated PA Nylon spring steel print sheet for the Prusa Pro HT90, designed for printing polyamide-based filaments.

Suitable for polyamide-based materials and PETG. Other filaments may not adhere reliably.
No glue stick required; clean using only water or a drop of mild dishwashing detergent for grease.
Not to be cleaned with IPA or acetone. These agents can damage the surface.
Consumable part: normal wear such as glossier surface or minor dull spots does not affect performance and is not a warranty issue.
Visible probe marks may be present.

Refer to the Prusa Knowledge Base repair manual for your model at help.prusa3d.com.

(50450)

Help other 3DPrintergear users shop smarter by writing reviews for products you have purchased.