Klipper Host Board

BIGTREETECH Pi V1.2

A Raspberry Pi sized single board computer built to run Klipper on your 3D printer.

Overview

 

The BIGTREETECH Pi V1.2 (BTT Pi) is a compact quad-core computer designed as the host for Klipper firmware. It has the same 85 x 56 mm footprint and mounting hole positions as a Raspberry Pi, with built-in 2.4GHz WiFi, Ethernet, four USB ports and a 40-pin GPIO header.

Unlike a standard Pi, it can be powered straight from your printer's 12V or 24V power supply through a screw terminal, so there is no separate 5V adapter to wire in. Dedicated ports for an ADXL345 accelerometer and a USB to CAN module make input shaping and CAN bus toolhead setups simpler.

Key Specifications

 
CPU: Allwinner H616, quad-core Cortex-A53 at 1.5GHz
GPU: Mali G31 MP2, supports OpenGL 3.2
Memory: 1GB DDR3L
Storage: microSD card slot
Display output: Micro HDMI 2.0a, supports 4K displays, plus SPI display port
Network: 100M Ethernet and 2.4GHz WiFi (802.11 b/g/n)
USB: 4 x USB 2.0, 1 x USB Type-C (power)
Expansion: 40-pin GPIO, ADXL345 (SPI) port, USB to CAN module port
Audio: 3.5mm headphone jack
Power input: DC 5V 2A via USB Type-C, or DC 12V to 24V via terminal
Board size: 85 x 56 mm
Mounting holes: 64 x 49.4 mm

Features

 
  • Purpose built to run Klipper, with a ready-made operating system image available from BIGTREETECH
  • Same board size and mounting hole positions as a Raspberry Pi
  • Runs directly from the printer power supply (12V to 24V) or from 5V USB Type-C
  • Built-in 2.4GHz WiFi with external antenna, plus wired Ethernet
  • Onboard port for an ADXL345 accelerometer, used for Klipper input shaper tuning
  • Onboard port for a USB to CAN module for CAN bus toolheads
  • Built-in IR receiver and 3.5mm audio jack
  • Micro HDMI and SPI display outputs for running KlipperScreen on a touchscreen

Compatibility

 

Works as the Klipper host for any Klipper-capable printer mainboard connected over USB, including BIGTREETECH boards such as the SKR Mini E3 V3.0, SKR Pico and Octopus. It suits i3 and CoreXY style printers being converted to Klipper.

  • A microSD card is required for the operating system and is not included
  • WiFi is 2.4GHz only
  • Mounting holes match a Raspberry Pi, but the port layout differs, so most Raspberry Pi cases will not fit

Specifications are taken from BIGTREETECH's published documentation for the Pi V1.2. The ADXL345 accelerometer module, USB to CAN module, display and microSD card are sold separately.

(75576)

SKU 75576
Brand BIGTREETECH
Shipping Weight 0.1500kg
Shipping Width 0.090m
Shipping Height 0.050m
Shipping Length 0.120m
Shipping Cubic 0.000540000m3

Be The First To Review This Product!

Help other 3DPrintergear users shop smarter by writing reviews for products you have purchased.

Write a product review