Prusa CORE One Maintenance Kit

The spares a CORE One needs over its life, in one box.

Overview

Genuine Original Prusa maintenance kit for the CORE One and CORE One+: a set of the wear parts, spares and fasteners that a busy machine gets through, so a repair is a swap from the shelf rather than a wait on freight. It includes a complete assembled hotend with a 0.4mm brass nozzle, an assembled heatsink with loadcell and filament sensor, both fans, bearings, a heatbed thermistor set, the small parts bag and the fasteners to go with them. If you run a CORE One in a school, a farm or a workshop, this is the kit to have on hand.

Key Details

Features

• Complete assembled hotend: block, heater, thermistor, 0.4mm Prusa brass nozzle and silicone sock
• Assembled hotend heatsink with loadcell and filament sensor
• Hotend fan and part cooling blower fan, plus a printed PCCF fan shroud
• Two prelubricated LM8UU bearings and two LM10LUU CoreXY bearings in their mounts, with lubricant
• Heatbed thermistor set
• Nozzle thumb screws (2), PTFE tube 4 x 2.5 x 45 mm
• Small parts and fasteners bag: thermal pads, magnets, pulleys, extruder parts, spare screws, nuts and rivets
• 20 zip ties, 5 cable ties, cleaning needle and IPA pad

Compatibility

Listed by Prusa for the CORE One and CORE One+. Prusa lists it as not compatible with the CORE One L, CORE One L+ and CORE One+ (Gen 2). Check your model before ordering.